FEL OPERATING PROCEDURES - Continued
Figure 1. Clutch Cutout Switch.
4-in-1 FEL bucket indicators are located on right side of FEL bucket. Bucket position
indicator (Figure 2, Item 1) shows correct bucket angle when bucket is used as dozer,
scraper, loader (standard bucket), or clamshell. Clamshell depth indicator (Figure 2, Item 2)
is used when bucket is in scraper position. Bucket opening or depth of cut is shown as 0 to 4
inches (0 to 102 mm).
Figure 2. 4-in-1 FEL Bucket Indicators.