LEVEL B PREPARATION CONTINUED
The containers in or on machine and equipment which are placed in sheltered (not exposed to
elements) areas shall remain in place with machine and equipment.
d. Remove BII containers stowed in exposed locations on the machine and equipment, which are
exposed to the elements, and place inside warehouse.
e. Identify machine from which BII containers were removed and mark to indicate that outside storage is
4. Windshield Wiper Bottle. Fill windshield wiper water bottle with a water mixture that will prevent freezing
appropriate to area being assigned.
5. Securement. Load and secure each machine for transport.
a. Ensure loading and securement methods are sufficient and safe for intended purpose.
b. Loading and securement shall conform to carrier requirements and applicable transportation
regulations. Guidance for all modes of military shipments is provided by the Military Traffic
Management Command Transportation Engineering Agency.
END OF TASK
LEVEL B LOADING
Level B processed machines (drive-on/drive-off) are not acceptable for deck loading
on ocean transport. Failure to follow this caution may result in damage to machine or
Quality Assurance Provisions. Unless otherwise specified in the contract or purchase order, the contractor
is responsible for establishing quality system that satisfies program objectives and meets all standard
requirements and give full consideration to specific requirements on EPDS for machine.
END OF TASK
END OF WORK PACKAGE