Use tire and rim lubricant as necessary to avoid damaging tire beads or bead seats during
demounting and mounting. Never use petroleum-based products such as oil or grease
when demounting/mounting tires from rims. Petroleum-based products have a severe
degrading effect on tire rubber. Use only approved tire and rim lubricant. Failure to follow
this caution may result in damage to equipment.
Tires are directional. Refer to tire sidewall for direction of rotation.
1. Place wheel (Figure 4, Item 2) flat on floor.
2. Lubricate both beads of tire (Figure 4, Item 3) and place tire on rim (Figure 4, Item 1).
3. Install inner bead on rim (Figure 4, Item 1) and work around rim until inner tire bead is on rim.
4. Install outer tire bead on rim (Figure 4, Item 1) and work around rim until tire bead is completely on rim.
Figure 4. Installing Rim On Tire.