Allow hydraulic system to cool before performing procedure. Hot metal parts can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
Tag and mark hydraulic hoses to aid in installation.
Note routing of hydraulic hoses to aid in installation.
1. Loosen two clamps (Figure 1, Item 2) and disconnect hydraulic oil cooler hoses (Figure 1, Item 3) from trans-
mission/hydraulic oil cooler (Figure 1, Item 1).
Figure 1. Left-Side Hydraulic Oil Cooler Hoses.