Allow hydraulic system to cool before performing procedure. Hot hydraulic fluid can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
Tag and mark lines and wires to aid in installation.
1. Remove four bolts (Figure 1, Item 1), washers (Figure 1, Item 2), and front end loader (FEL) linkage floor plate
(Figure 1, Item 3) from machine.
2. Remove rear floor plate (Figure 1, Item 4) from machine.
Figure 1. FEL Linkage Floor Plates.