Table 1. Field PMCS for the H100C Loader - (Continued).
NOT FULLY MISSION
ITEM NO. INTERVAL
g. Electrolyte in each cell must be at Battery leaking electrolyte.
proper level 1/4 to 1/2 in. (6 to 13 mm)
above plates at all times to prevent
battery failure. Check level of
electrolyte. When electrolyte is below
this level, pure distilled water must be
added. Never use hydrant water or
any water that has been in a metal
container. Under no circumstance add
any special battery "dopes", solutions,
h. Once battery PMCS is complete,
reconnect battery cables to battery
terminal, and check for tightness.
Check wheel lug nuts for correct
Two or more lug nuts missing.
Check tire for correct inflation
Tire does not hold pressure.