CLEANING AND INSPECTION
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and
low-toxicity material. However, it may be irritating to the eyes and skin. Use protective
gloves and goggles. Use in well ventilated areas. Keep away from open flames and other
sources of ignition. Failure to do so may result in injury or death to personnel.
1. Immerse coolers in solvent cleaning compound to loosen any sludge or foreign matter.
Do not use wire brushes or steel scrapers for removing deposits. Failure to follow these
instructions may cause damage to components.
2. Drain and blow out any solvent and foreign matter inside of coolers, being certain that all passages are clean
and clear before installation.
END OF TASK