Clean injection nozzle copper sleeves with a clean cloth. DO NOT use a screwdriver or
sharp metal object. Failure to follow this caution will result in damage to sleeves.
1. Install new cylinder head gasket (Figure 24, Item 2) on engine. Line up on dowel pins.
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device is in good condition and of
suitable load capacity. Keep clear of heavy parts supported by lifting equipment. Failure to
follow this warning may result in injury or death to personnel.
2. Using suitable lifting device, install cylinder head (Figure 24, Item 1).
Figure 24. Cylinder Head and Gasket.