Do not press seal down beyond the 1.0625 in. (27mm) dimension or it will block an
internal oil return passage in housing. Failure to follow this caution may result in damage
8. Install a new garter type oil seal (Figure 24, Item 3) into water pump housing (Figure 24, Item 2).
9. Install seal (Figure 24, Item 3) 1.0625 in. (27mm) below inner machine surface (Figure 24, Item 1) of water
pump housing (Figure 24, Item 2). Measure depth using a scale as indicated.
Figure 24. Garter Oil Seal Installation.