Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device is in good condition and of
suitable load capacity. Keep clear of heavy parts supported by lifting device. Failure to
follow this warning may result in injury or death to personnel.
6. Use a suitable lifting device to remove converter assembly (Figure 6, Item 1) from housing (Figure 6, Item 2).
Figure 6. Converter Removal.
7. Place converter assembly (Figure 7, Item 1) on bench. Block impeller (Figure 7, Item 2) high enough to allow
accessory drive gear (Figure 7, Item 3) to clear bench. Remove lifting device.
Figure 7. Converter Positioning.