Align holes in clutch supports with holes in transmis-
Install bearing cap bolts and tighten 20 to 25 ft. Ibs.
sion case and install self locking bolts, Tighten bolts
75 to 85 ft. Ibs. torque [10,4-11,7 m.kg].
Apply a thin coat of Permatex No. 2 on the outer
diameter of the input shaft oil seal. With lip of seal
inward, press oil seal in bearing cap 5/16" [7,92 mm]
below face of cap. Install new gasket and cap on input
Install idler gear and retainer ring.
Install new gasket on reverse shaft bearing cap. Posi-
Install bearing cap bolt; and tighten 20 to 25 ft. Ibs
tion cap over bearing.
torque [2,8-3,4 m.kg].