34. Some axles use thrust ring in end of spindle. If pro-
lbs. (reading on pull scale) equals 21 1 in. 1bs. Divid-
vided, tap thrust ring into spindle until it is fully
ing by 12 equals approximately 17 ft. Ibs. which is
seated [Fig. 188).
within specifications of 15 to 20 ft. Ibs. rotating
35. Install planet carrier "O" ring on planet carrier as-
sembly, and install planet carrier assembly on hub
torque (Fig. 189).
32. Install nut lock and outer nut and tighten securely
as shown in Fig. 182 to lock inner nut in position. Re-
check rotating preload torque by one of two methods
Bend two tangs of nut lock against Rats on inner nut
and bend two tongs against flats of outer nut (Fig.
36. Position sun gear on axle shaft; secure with sun gear
retaining ring (Fig. 190).