Remove bucket from trailer and install
This procedure must be performed on
smooth level surface.
Remove nut and base plate from
Reinstall nut on capscrew.
plate aside for later use.
Chock trailer wheels before unloading
bucket from trailer.
Drive machine and trailer off aircraft
onto smooth level surface.
Remove clip and jack handle from
Reinstall clip on trailer.
handle aside for later use.
Remove nut from stud and remove screw
jack from the trailer.
Set screw jack
aside for later use.
Reinstall the nut on the stud.
place jack screw base plate on ground,
with bosses facing up, at rear center of
Position jack screw on base plate