ETHER STARTING AID - ETHER CYLINDER
Ether is a poison and is flammable.
Do not smoke while installing or changing
the ether cylinder.
Use ether only in well ventilated areas.
Use ether with care to avoid fires.
Do not store replacement cylinders in liv-
i n g a r e a s o r i n t h e o p e r a t o r s
Keep ether cylinders out of the reach of
Avoid breathing of the vapors or repeated
contact of ether with the skin.
Do not store cylinders at temperatures
above 49°C (120°F).
Do not store cylinders in direct
Do not puncture or burn cylinders.
Discard empty cylinders in a safe
The ether cylinder valve is located in the
service compartment behind the operators
Initial Installation (typical procedure
1. Remove the protective plug
the ether cylinder valve. Store the plug in
the threaded holder
2. Install the gasket into the valve.
3. Screw the ether cylinder
valve hand tight, Do not use any tools to
tighten it. Fasten the cylinder clamp
securely around the cylinder.