Every 500 Service Hours or 3 Months
ENGINE CRANKCASE BREATHER
When using pressure air, wear a protective
face shield and protective clothing. The
maximum air pressure must be below 205
kPa (30 psi) for cleaning purposes.
Use all cleaning solutions with care.
3. Inspect the seal. Replace the seal, if it
1. With the engine stopped and cool,
loosen the crankcase breather bolt and the
4. Install the breather. Tighten the hose
clamp. Tighten the breather bolt to 14 ± 3
N·m (10 ± 2 lb ft).
2. Remove the breather. Wash the
breather in clean, nonflammable solvent.
Shake or blow it dry.