Make sure each hole in top tank (10) is clean.
Put liquid soap on the sealing areas of the top
tank for the seals. Install top tank (10). Make
sure each core is in alignment with the holes
in the top tank. Carefully push top tank (10)
into position on the cores. Install the bolts
that hold the channels to the top tank.
Make an adjustment to the cores to get a gap
(X) of .25 in. (6.4 mm) between the bevel
end of the cores (grille side).
Tighten straps (8) as the adjustments are
made. Tighten the remainder of the bolts
that hold the cores and top tank in place.
DISASSEMBLY AND ASSEMBLY
13. Install baffle assemblies (11) and (12).