DISASSEMBLY AND ASSEMBLY
TIRES AND RIMS
INSTALL TIRES AND RIMS
Fasten a hoist to tire and rim (1) and put it in
position on the wheel assembly.
Install the washers and nuts (2) to hold tire and
rim (1). Tighten the nuts to a torque of 475 ±
50 N·m (350 ± 37lb.ft.).
Lift the front of the machine and remove tool-
ing (A) from the loader frame.
Remove the blocks from between the rear axle
housing and frame.
Lift the rear of the machine and remove tooling
Disconnect the anti-pivot link from the main
frames and put it in its storage position.