DISASSEMBLY AND ASSEMBLY
FINAL DRIVE PLANET CARRIERS
DISASSEMBLE FINAL DRIVE
a) remove final drives
1. Lift three shafts (1) out of the carrier.
2. Remove three gears (2) and twelve spacers from
retainer rings (3) from shafts (1).
two bearings (4) from each gear (2).
ASSEMBLE FINAL DRIVE PLANET
Install bearings (1) in gears (2).
Install retainer rings (4) on shafts (3).
Put the gears in position in the carrier with steel
spacers (6) next to the gears and bronze spacers
(5) between the carrier and the steel spacers.
Make sure the oil grooves on the steel spacers
are toward the bronze spacers.
Install shafts (3) in the carrier. Make sure the
flat side of the shafts are toward the outside of
the carrier as shown.
a) install final drives