DISASSEMBLY AND ASSEMBLY
REAR AXLE HOUSING REAR SUPPORT
INSTALL REAR AXLE HOUSING REAR
1. Put O-ring seal (2) imposition ontrunnion (l)
as shown. Put clean differential oil on the O-
2. Install trunnion (1) on the axle housing and
install the bolts. Tighten the bolts to a torque of
270 ± 25 N·m (200 ± 18 lb. ft.).
3. Connect bracket (3) to the trunnion.
4. Use tooling (A) and install the bearing until it
is even with the counterbore in support (4).