ASSEMBLE TORQUE CONVERTER OUTLET
Make sure all of the parts of the relief valve are
clean and free of dirt and foreign material. Put
clean oil on all the parts at assembly.
Install poppet (1), spring (2), retainer (3) and
ring (4) in valve spool (5). Make sure the
shoulder on retainer (3) is toward spring (2)
when it is installed.
Install valve spool (5), spacers (6) and spring
(7) in valve body (8) as shown.
DISASSEMBLY AND ASSEMBLY
OUTLET RELIEF VALVE
NOTE: Spacers (6) are used to make an adjustment
to the pressure needed to open the torque converter
outlet relief valve. See POWER SHIFT TRANS-
MISSION TESTING AND ADJUSTING for the
correct pressure setting.
4. Install O-ring seals (10) and covers (9) and
(11) on the ends of valve body (8).
5. Install O-ring seals ( 12) and ( 13) in valve body
a) install torque converter outlet relief valve