T R A N S M I S S I O N
Remove plate (39) and springs (42) from
Lift housing (134) from gear assembly (135).
For Models 950BNSCE and 950BSCE only,
inspect carrier and ring (136); replace if
Remove rings (44) from the housing.
Do not remove seal carrier (43) from the
housing unless it is worn or damaged. Use
a hammer and chisel to break the carrier and
remove it. After carrier (43) is removed,
remove the pin that holds the carrier in
position on the housing.
Use tool (D) and remove ring (45).
Remove gear (46).
Remove four discs (47) and the three plates
Remove gear (48).
DISASSEMBLY AND ASSEMBLY