DISASSEMBLY AND ASSEMBLY
Install gear (15) in the No. 1 clutch housing.
Install gear (16) on the shaft.
Install bearing (20) in gear (19).
Install washers (18), the gears and bearings
and washers (21) in the carrier.
Install shafts (17) that hold the washers, gears
and bearings in carrier (23).
NOTE: If pins (22) are damaged, a replacement will
Use a hammer and a punch to install pins (22)
that hold the shafts in the carrier. Make sure
the pins are installed even with the counterbore
in the carrier.
Install ring (24) on carrier (23).