DISASSEMBLY AND ASSEMBLY
Install three discs (76) and two plates (77)
(fourth speed). Start and stop with a disc as
Install springs (78) on rods (49).
Install rings (79) and (81) on piston (80).
Make sure the lips of the rings are as shown on
Install tooling (F) on No. 3 and 4 clutch hous-
Install piston (80) in No. 3 and 4 clutch housing
(82) as shown. Make sure that the lips of the
seals are down.
Install plate (83) on the clutch housing as
shown. Make sure the larger holes in the plate
are in alignment with the larger holes in the
64. install tooling (G) to hold plate (83) to the