DISASSEMBLY AND ASSEMBLY
Fasten a hoist to No. 3 and 4 clutch housing
(82) and install on the No. 2 clutch housing as
Install rings (84) and (86) on piston (85).
Make sure the lips of the rings areas shown on
Install piston (85) in the No. 3 and 4 clutch
housing as shown. Make sure that the lips of the
seals are down.
Install plate (86) in gear (87).
Install ring (88) in the gear that holds the plate
Install gear (87) and the plate in the No. 3 and
4 clutch housing as shown. Make sure the gear
teeth on the gear are in alignment with the