DISASSEMBLY AND ASSEMBLY
TILT LINK AND LEVER
Install the lip type seals in the link with tooling
(C). The lip of the seal must be toward the
Put 5P960 Multipurpose Type Grease in the
bores of the link, lever, tilt cylinder and the
Put link (4) in place in lever (3) and install pin
Install spacer (6), the washer and bolt (5) that
holds pin (2) in place.
Fasten a hoist to the link and lever assembly
and put it in position on the machine.
Fasten a hoist to pin (7) and install pin (7) in
the lever assembly.