DISASSEMBLY AND ASSEMBLY
Install spacers (5), washers (4) and bolts (3)
that hold the pins in place.
Install bracket and light assemblies (6) on both
sides of the machine and connect the wires.
Fasten a hoist to the lift cylinders. Lift the
cylinders into position and install pins (7).
Install the spacers, washers and bolts (8) that
hold the pins in place.
14. Install grease fittings (9) in both pins (7).
15. Fill the lift cylinders and rear bores with 5P960
Multipurpose Type Grease.
a) install bucket
b) install tilt link and lever
c) install tilt cylinder