DISASSEMBLY AND ASSEMBLY
PILOT CONTROL VALVE
INSTALL PILOT CONTROL VALVE
1. Install bracket (1) in position on the valve and
install the two bolts.
2. Put the valve (2) in position and install four
bolts (3) that hold the valve in place.
3. Connect two linkages (4) to the valve.
4. Remove the plugs or caps from the lines.
5. Connect lines (5) to the valves.
6. Put access panel (6) in the CLOSED posi-
7. Remove the air from the hydraulic system. See
REMOVE THE AIR FROM THE HY-