DISASSEMBLY AND ASSEMBLY
ASSEMBLE TILT CYLINDER
A B C D E F
Pump Group (or electric) 1
Rod Seal Guide
Install inner seal (4) in head (1). The inner
seal does not have a lip and can be installed
either way. Install middle seal (3) with the lip
in. Use tooling (A) and install outer seal (2)
with the lip out. Put clean oil on the seals. For
models 950BNSCE and 950BSCE, install wear
Install backup ring (6) and O-ring seal (5) on
head (1). Make sure the backup ring is away
from the oil in the cylinder.
3. Put the cylinder and rod in position on tooling
4. Install head (1) on the cylinder as shown and
install two bolts to hold it.
NOTE: Use two persons to install the cylinder head.
5. Put tooling (C) in position on rod (7). Use
tooling (B) to install head (1) on rod (7).