DISASSEMBLY AND ASSEMBLY
9. Use tooling (A) to make a connection of the
cylinder and head.
10. Install bolts (8) to hold the cylinder and head
11. Use tooling (A) to pull head (12) off rod (13).
12. Remove O-ring seal (14) and backup ring (15)
from the head.
13. Remove lip type seal (16) from the head
14. Remove seal rings (17) from the head.
NOTE: Models 950BSCE and 950BNSCE are
with a wear ring. Models 950BS and 950BNS
15. For models 950BNSCE and 950BSCE only,
remove wear ring (18).