DISASSEMBLY AND ASSEMBLY
INSTALL STEERING CYLINDERS
1. Install steering cylinder (1) as shown.
2. Put pin (3) in position and install spacer (4) and
bolt (2) that hold the pin in place.
3. Put pin (5) in position and install spacer (7) and
bolt (6) that hold the pin in place.
4. Connect oil line (8) to the rod end of the cylin-
5. Connect oil line (9) and the grease line to the
rear of the steering cylinder.
6. Follow Steps 1 through 5 to install the other
a) separation of anti-pivot link