DISASSEMBLY AND ASSEMBLY
NOTE: Models 950BNSCE and 950BSCE do
not use tube assembly (29).
Remove the bolts (from the back side of the
cover assembly) and remove gauge group (28 )
and tube assembly (29) from the cover assem-
Remove O-ring seals (33), grommet (30), glass
(31) and plate (32) from retainer (34).
ASSEMBLE HYDRAULIC TANK
Clean and inspect all parts. Make a replace-
ment of all parts that are worn or damaged.
Install grommet (2) on glass (3).
Install plate (4), the glass and grommet and O-
ring seals (1) on retainer (5).
NOTE: Tube assembly (7) is not used on
models 950BNSCE and 950BSCE.
4. Install the O-ring seals on tube assembly (7)
and gauge group (6). Install tube assembly (7)
and gauge group (6) on the cover assembly.
Tighten the bolts that hold the gauge group to a
torque of 24 ± 3 Nm (17 ± 2 lb. ft.).