DISASSEMBLY AND ASSEMBLY
LOADER MAIN FRAMES
ModeIs 950BNS and 950BS
13. Remove bolts (17), the washers and the spacers
that hold pins (16) in place. Remove pins (16)
from both sides of the machine to disconnect
the steering cylinders from the front frame.
14. Put blocks in front of and behind the tires.
15. Put a block (18) in position between the axle
and rear frame on each side to keep the rear
frame in the correct position.
Put an approved floor jack (19) under the front
of the rear frame.
Put tooling (A) in position under the front
frame as shown.
Put blocks (20) in position under the front
frame to hold it in position as shown.