DISASSEMBLY AND ASSEMBLY
LOADER MAIN FRAMES
Models 950 BNSCE and 950BSCE
11. Put a block (12) in position between the axle and
rear frame on each side to keep the rear frame in the
12. Put an approved floor jack (13) under the front of
the rear frame.
13. Put tooling (A) in position under the front frame as
14. Put blocks (14) in position under the front frame to
hold it in position as shown.
15. Put a lift truck in position under the rear frame as
shown. Fasten it to the frame with a chain or steel
16. Put tooling (B) under rear frame as shown.