REMOVE WATER PUMP
1. Drain the coolant from the cooling system.
2. Loosen the clamp and disconnect hose (l).
3. Loosen clamps (2) and disconnect hose (3)
from the water pump.
4. Put marks on wires (4) and disconnect them
from the sending unit.
5. Loosen the clamp that holds hose (5) to elbow
6. Remove bolts (6) and elbow (7) from the water
DISASSEMBLY AND ASSEMBLY
7. Loosen the nut on adjusting rod (8) to loosen
the tension on the vee belts.