4-4. COOLING SYSTEM MAINTENANCE (CONT)
d. Radiator and Guard (cont).
INSTALLATION (SHEET 1 OF 3)
When using chain hoist to remove or install parts, be sure chain hoist
i s s e c u r e l y f a s t e n e d t o p a r t a n d t h a t a l l s l a c k i n c h a i n i s t a k e n u p.
Failure to do so could cause serious injury due to part falling on you.
If you are injured by falling equipment, obtain medical aid immediately.
(1) Using a chain hoist securely attached to guard (26), move guard into
p o s i t i o n a t r e a r o f l o a d e r.
Install four capscrews (23), lock washers (25), and nuts (24).
(3) Disconnect chain hoist from guard (26).
(4) Position LH bracket (22) and RH bracket (21) at front of guard (26) and
rear chassis. Secure using eight capscrews (17), washers (20), lock
washers (19), and nuts (18).
(5) Position two brackets (16) in front of brackets (21 and 22) on rear
chassis. Secure to brackets (21 and 22) using two capscrews (12), washers
(15), lock washers (14), and nuts (13).