REMOVAL (SHEET 2 OF 2)
Carefully pull cab switch panel (3) up from heater console just enough to
gain access to wiring harness spade terminals at rear of switch panel.
At rear of DEFROSTER switch (11), disconnect wire lead (4) spade
terminals from DEFROSTER switch terminal and circuit breaker double spade
terminal (8) by grasping spade terminal with your fingers and firmly
pulling from switch and circuit breaker terminal.
Disconnect wiring harness brown-white wire spade terminal (5) from
DEFROSTER switch (11), red-white wire spade terminal (6) from circuit
breaker (13), and green wire spade terminal (7) from circuit breaker
double spade terminal (8) by grasping spade terminal with your finger
firmly pulling from associated terminal.
Loosen and remove nut (10) and remove DEFROSTER switch (11).
Loosen and remove round nut (12) and remove circuit breaker (13).
Pull double spade terminal (8) from circuit breaker (13) terminal.