INSTALLATION (SHEET 1 OF 3)
Spray all terminals and contacts with electrical cleaner and allow to
air dry before making connections.
Route new cab lower wiring harness between front wiring harness connector
and up through hole in cab deck to assistant in cab.
Connect cab lower wiring harness connector to front wiring harness con-
nector. Do this by grasping connectors, alining tabs, and firmly pushing
Install three tie straps to secure cab lower wiring harness to deck cross
member and heater hose.
Inside cab, at heater console, locate cab lower wiring harness white-
blue, blue, and yellow-black wires terminals. Connect these terminals to
associated male bullet terminals of cab console wiring harness. Do this
by grasping terminals with fingers, alining, and firmly pushing together.