3-15. AUXILIARY STEERING PUMP AND MOTOR MAINTENANCE (CONT)
b. Removal, Separation. Joining. and Installation (Cont).
Put auxiliary steering pump and motor
Dry cleaning solvent P-D-680 used to clean
Wear protective goggles and gloves and
on a clean workbench.
parts is toxic and flammable.
use only in a well ventilated
area. Avoid contact with skin, eyes and clothes and don't breathe
vapors. Do not use near open flame or excessive heat and donut smoke
when using it. Failure to do so could cause serious injury. If you be-
come dizzy while using cleaning solvent, get fresh air and medical
If contact with skin or clothes is made, flush
with large amounts of water.
If contact with eyes is made, wash eyes
with water and get medical aid immediately.
Using cleaning solvent P-D-
680, clean exterior of auxilia-
ry steering pump and motor. Dry
using clean cloths.
Using hammer and punch, put
match marks on pump and motor
to aid joining of these parts.
Remove four capscrews and lock
Separate pump from motor.
Remove drive coupling from motor shaft.