3-18. FRONT CHASSIS MAINTENANCE (CONT)
a. Access Door (Cont).
CLEANING, INSPECTION AND REPAIR
Dry cleaning solvent P-D-680 used to clean parts is toxic and flammable.
Wear protective goggles and gloves and use only in a well ventilated
area. Avoid contact with skin, eyes and clothes and dont breathe
vapors. Do not use near open flame or excessive heat and dont smoke
when using it. Failure to do so could cause serious injury. If you be-
come dizzy while using cleaning solvent, get fresh air and medical
If contact with skin or clothes is made, flush
with large amounts of water.
If contact with eyes is made, wash eyes
with water and get medical aid immediately.
Clean all parts using cleaning solvent P-D-680. Dry using clean cloths.
Replace an item if inspection indicates need for replacement.
Inspect access door (12) for cracks, breaks, deformation, or other dam-
age. Remove rust and corrosion using scratch wire brush and abrasive
cloth. Touch up painted areas using paint.
Inspect handle parts (1 through 6) for cracks, breaks, deformation, dis-
tortion, and damaged or stripped threads. If any of these conditions
exist, replace complete handle (1 through 6) as an assembly.
Inspect stop (17) for cracks, breaks, or other damage. Remove rust and
corrosion using scratch wire brush and abrasive cloth. Touch up painted
areas using paint.
Inspect remaining parts for cracks, breaks, distortion, deformation, or