PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
NOT FULLY MISSION
Cab Air Filters c. Inspect air filter for tears or holes. If
torn or otherwise damaged, obtain a
replacement from Unit Maintenance.
WARN I N G
Particles blown by compressed air are hazardous. Use a
maximum of 30 psi (207 kPa) when cleaning components.
DO NOT direct compressed air against human skin.
Make sure air stream is directed away from user and
other personnel in the area. To prevent injury, user must
wear protective goggles or face shield. Failure to follow
this warning may result in injury to personnel.
d.Clean air filter with compressed air
or wash air filter in a solution of
detergent and water. Rinse thor-
oughly and air dry.
e. Position air filter in grille. Position
grille and install and tighten two
thumbscrews by turning clockwise
(to the right).
N OT E
Raise operator seat in order to remove filter elements.
f. Turn counterclockwise (to the left)
and remove two thumbscrews and
angle bracket from seat console.