CONFIGURE MACHINE FOR TRANSPORT - CONTINUED
ROPS/FOPS INSTALLATION - CONTINUED
CAU T I ON
Ensure ROPS/FOPS is lowered straight down until fully seated on operator station. Failure to do so
could result in damage to operator station and cab components.
Slowly lower ROPS/FOPS onto chassis, aligning mounting bolt holes in ROPS/FOPS with guide pins. Lower
ROPS/FOPS until fully seated.
Move steering wheel upward to its operating
Return seat back to its upright position (WP
N OT E
Apply lubricating oil to all threads prior
to installation of bolts.
Loosely install six bolts in each rear corner of
cab. Remove guide pin from each rear corner of
cab and install remaining bolt.
Loosely install bolt in each front corner of cab.