TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
Table 2. Machine Control System - Continued.
TEST OR INSPECTION
CID FMI CODE
1. Check parking brake switch ground circuit 1. If resistance is less than 5.0 Ohms,
circuit is correct. Go to Test 2.
(a) Turn engine start switch and battery
2. If resistance is greater than 5,000
disconnect switch to OFF position
Ohms, circuit is open. Replace wiring
harness in question (WP 0169 00 thru
(b) Disconnect wiring harness
WP 0175 00).
connector(s) from ECM (WP 0052 00).
J2-52 (wire E417 OR) of ECM wiring
harness and contact N/C (wire E417
OR) at switch.