TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
Table 2. Machine Control System - Continued.
TEST OR INSPECTION
CID FMI CODE
1. Check system during self-test. Turn engine 1. If secondary steering light illuminates
start switch to ON position (TM 5-3805-290-
and wheel can be turned, operate
10). Wait for instrument cluster self-test to
machine and check for a recurrence of
complete. Then, secondary steering system
performs a self-test. For three seconds,
2. If secondary steering light does not
secondary steering light should illuminate
illuminate, and wheel will not turn
and wheel can be turned.
during self-test, go to Test 2.
3. If secondary steering light does not
illuminate but wheel does turn during
self-test, go to Test 3.
4. If secondary steering light illuminates
but wheel does not turn during self-test,
go to Test 2.