TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
Table 2. Machine Control System - Continued.
TEST OR INSPECTION
CID FMI CODE
N OT E
This test procedure may create other diagnostic codes. Ignore these created diag-
nostic codes and clear these diagnostic codes when original diagnostic code has
been corrected. Ensure diagnostic code CID 1402 FMI 06 is active before per-
forming this procedure.
1. Check clutch 2 (forward high) solenoid.
1. If CID 1402 FMI 06 changes to CID
(a) Turn battery disconnect switch and
1402 FMI 05 when clutch 2 (forward
engine start switch to ON position (TM
2 (forward high) solenoid has failed.
Repeat this test to verify clutch 2
observe status of diagnostic code.
(forward high) solenoid failure.
(c) Disconnect clutch 2 (forward high)
Replace modulating valve (WP 0177
2. If CID 1402 FMI 06 remains active, go
to Test 2.