TRANSMISSION TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
TRANSMISSION PRESSURES TEST AND ADJUSTMENT - CONTINUED
Lubrication Oil Pressure Test
N OT E
· Use this procedure to check pressure of transmission lubrication oil.
· Inlet for transmission lubrication oil is located on right side of machine.
Install correct adapter at pressure tap (7).
Install hose assembly from pressure gage on pressure
tap (7). Attach opposite end of hose assembly to 0 to
58 psi (0 to 400 kPa) pressure gage.
Start engine and operate engine at high idle (TM 5-3805-290-10). Observe pressure gage. With oil at normal operating
temperature, lubrication oil pressure must be within values shown in Table 6.
Table 6. Transmission Oil Pressure.
25 ± 5 psi
(170 ± 34 kPa)