TIRE AND WHEEL (FRONT OR REAR) REPLACEMENT - CONTINUED
With assistance, use floor jack to raise machine. Place
jack stand under machine.
N OT E
Tire and rim assembly weighs 470 lb
Support tire and rim assembly (1) with lifting device.
With assistance, remove 16 bolts (2), washers (3), and
tire and rim assembly (1) from machine.
WARN I N G
When installing bolts, do not put your arm between rim and final drive without first wedging block of
hardwood between rim and final drive. Failure to follow this warning may result in injury or death to per-
N OT E
Tire and rim assembly weighs 470 lb (213 kg).
With assistance, use lifting equipment to install tire and rim assembly (1), 16 washers (3), and bolts (2). Tighten bolts
(2) to 220 ± 30 lb-ft (300 ± 40 Nm). Tighten bolt in a crisscross pattern.
Turn bolts an additional 60 ± 5 degrees.