STEERING CYLINDERS REPLACEMENT - CONTINUED
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing hydraulic lines. Contamination of hydraulic system could result in premature failure.
N OT E
· The following procedure is for the left steering cylinder. The procedure for the right is identical.
· Tag hydraulic hoses to ensure correct installation.
· Use a container to catch any hydraulic oil that may drain from hoses or system. Dispose of fluid IAW local
policy and ordinances. Ensure all spills are cleaned up.
· Steering should be fully articulated in the opposite direction of cylinder removed.
Disconnect hose assemblies (1 and 2) and remove O-
ring (3) from steering cylinder (4). Discard O-ring.
Disconnect hose assemblies (5 and 6) and remove O-
rings (7 and 8) from T (9). Discard O-rings.