HOOD AND SIDE COVERS REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury or
death to personnel.
N OT E
Door assembly weighs 70 lb (32 kg).
With assistance, support door assembly (4).
Remove two nuts (5) and washers (6) from two hinge
Remove two nuts (8), three washers (9), and strut
assembly (10) from door assembly (4) and machine.
Remove two hinge bolts (7) and washers (11) from
two hinge assembles (12).
Remove door assembly (4) from machine.
Repeat steps 3 thru 7 for door assembly (4) on
opposite side of machine.
Loosen clamp (13) on hose (14).
Disconnect hose (14) from hood assembly (15).