DATA PLATES REPLACEMENT - CONTINUED
DATA PLATE (SOLID RIVET) REPLACEMENT
WARN I N G
To prevent injury to personnel, wear protective eye covering and gloves.
Using center punch and hammer, mark center of each solid rivet (1) on data plate (2).
Using electric drill and twist drill slightly larger than body diameter of solid rivet (1), drill into four rivet heads until
rivet heads can be separated from rivet bodies. Remove four rivet heads from data plate (2).
Remove data plate (2) from machine.
CAU T I ON
DO NOT drill any deeper than necessary to remove rivet body. Failure to comply will result in damage to
Using twist drill with same diameter as solid rivet (1)
bodies, remove four rivet bodies from machine. Dis-
card rivet bodies.
Install new data plate (2) on machine with four new
solid rivets (1).