ENGINE REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in
injury or death to personnel.
N OT E
Engine weighs 1,300 lb (590 kg).
Remove bolt (68), four washers (69), rubber mount
(70), sleeve (71), and nut (72) from engine mount
Repeat step 27 for engine mount (73) on other side.
Remove bolt (74) and two washers (75) from engine
and position heater hoses (76) aside.
Remove bolt (77), washer (78), and two clamps (79)
from bracket (80) and position transmission wiring
harness (81) aside.